HEAT PUMP

​

IT IS VERY EASY TO HEAT POOL WATER WITH HEAT PUMPS

​

Devices that transfer heat energy from one environment to another environment are called Heat Pumps. As the name suggests, they act as pumps that transfer energy between environments.

​

IS THE SOLUTIONS TO ALL YOUR NEEDS

​

Ecocycle Air Source Heat Pump heats and cools your environment, so meets all your needs with one device.

The working principle of the system is based on the reverse operation of the classical cycle. In other words, while the natural flow of the air takes place from the place where the heat is intense to the place where the heat is less intense, the heat pump enables the interior space to be heated by using the lower temperature of the outside air for heating in winter, and decreases the heat by giving the heat it receives from the interior to the outside in summer. Since the cycle works by heat transfer from air to water, it heats and cools the water.

​

HEATING, COOLING AND DRYING SYSTEMS

​

We can list the equipment used in pool heating as follows.

​

Pool Heat Pumps

​

It provides approximately 80% of the energy required to heat the pool from the existing heat resurces in the air. It consumes electricity for only 20% of the required heat energy.

• Operating cost; 50% lower than natural gas, 75% lower than diesel, fuel-oil and LPG, and 80% lower than electrical resistance. It can be used for heating and cooling

• The heat exchanger that provides the air-water energy transfer in the device is made of titanium. It can be easily installed in pools with sea water.

• There is an electronic-numerical control panel on the device that also shows the temperature of the water.

• Heating or cooling operating modes are selected from this panel.

• It can be easily installed in existing pool installations without any infrastructure difficulties.

• The body is made of plastic that will not cause corrosion problems in damp engine rooms.

• When the outside temperature is 20 ° C; is designed to heat / cool the pool ± 12 ° C within 5 days. • In this process, the use of solar pool cover contributes to the of the time and energy saving.

• When the ambient temperature is below 10 ° C, it does not work efficiently.

Plate Heat Exchangers

Plate Heat Exchangers are devices that work according to the principle of heat transfer between two different fluids with a temperature difference between them. They are completely separated from each other by the fluid to heat and the fluid to be heated plates. Standard plate heat exchangers have a total of four inlet-outlet ports, two of which are the inlets and outlets of the heating fluid and the other two are the fluid to be heated. It is also possible to make Heat Exchangers with more than one heater or fluid to be heated with special production.

 

Electric Heaters

* Sturong, durable structure,

* Titanium heating elements,

* 316 stainless steel flow tube,

* Ultra reliable flow switch ensures safe operation even at flow rates as low as 400 lt / h.

* It can be mounted on the surface or wall with the use of swivel feet,

* Single pole thermostat control 0-40 ° C,

* Single pole high limit control 60 ° C,

* 1,5 ”BSP water connection

 

DEHUMIDIFIERS

​

Provide energy-efficient humidity control for indoor pool areas. The desired humidity in the room can be adjusted on the device with the digital hygrometer. When humidity is not controlled in indoor swimming pools, it damages buildings and built areas. In winter and cool summer evenings, when the temperature difference between indoor and outdoor, perspiration occurs on the walls and glass surfaces. When the relative humidity in the air exceeds 60 to 65%, it starts to damage the construction space. When chemicals added to the pool water for disinfectant purposes combine with moisture, they form hydrochloric acid. This situation accelerates corrosion.

 

POOL LIGHTING EQUIPMENT

​

Our products are designed for use in or near water. It produces more light with less energy. It is extremely economical thanks to its resistance. Due to it’s features, can be used for years without being affected by natural conditions. It gives to the architects and designers the opportunity to realize their creative ideas with a wide range of color options and its ability to capture 16 million intermediate colors. With the LED lighting used in swimming pools and ornamental pools, we are sure of success of the projects.

 

IN-POOL EQUIPMENTS

​

You can procure all in-pool equipment such as skimmers, feeding nozzles, strainers, grates, with the quality and guarantee of Mediterra Pool.

 

POOL EDGE EQUIPMENTS

​

You can procure all kinds of edge equipment such as stainless steel - chrome pool stairs, pool showers, trampolines, pvs and stainless steel overflow grids, GRP foot washing troughs, pool anti-skid, pool ceramics, porcelain anti-slip, with quality of Mediterra Pool.

 

POOL FILTRATION PUMPS

​

In our projects we use environmentally friendly, new generation domestic production or, according to preference, European origin, pre-filter, pool pumps. Together with the filtration pumps with powers from 1/2 HP to 10HP, we also share our experience. You can contact our sales office for product types and any technical information.

 

SWIMMING POOL SAND FILTERS

​

Pool safety and pool cleaning is an important condition for pool users as well as for pool owners. The necessary procedures for effective pool cleaning should be done step by step, and it should be determined that the pool water values ​​after cleaning are in accordance with the pool regulations.

 

There are two main steps in pool cleaning. These processes are called filtration and disinfection. Pool filtratio is named the process of physically removing of all kinds of solid materials such as sand, hair, stone. Pool cleaning equipment that plays an active role in filtration can be specified as sand filters. Sand filters have undertaken the most crucial process in purifying the pool water from impurities. They are used in the removal of solid materials suspended in water, as well as in the removal of impurities that cause cloudy appearance that cause an abnormality in water color.

 

Sand filters positioned in the machine room are used together with fine filling materials of 0.5 - 1.5 mm made of quartz quality Sio2 or glass. While the filtration pump absorbs the dirty pool water and sends it to the sand filter, the clean water is provided by attaching the impurities to the sand filter filling material. Sand filters varying according to the flow rate of water; Open sand filters can be listed as low speed sand filters, standard speed filters, medium speed sand filters, high speed sand filters.